Tag: Off Road

NP231 Slip Yoke Eliminator

Installing a Slip Yoke Eliminator to avoid a transfer case drop and possibly dropping the driveshaft while off roading.

Fabricating and installing a Dirt Bound Off Road - DIY Mojave rear bumper for some extra protection on the trails.

Installing 6x9 speakers in the lift gate to get some more bump in the trunk.

LED Light bars are illegal to use on the highway and stock, sealed beam headlights suck. So let’s mix the two that are D.O.T. approved.

Tearing down the GM steering column to replace the Ignition Cylinder.

Tired of breaking mirrors on the Trail. I installed The Flop Shops - Trail Mirrors, the last set of mirrors you’ll ever need.

Replacing my stock 52mm throttle body with a 60mm and adapting a THOR cowl intake system to the Renix throttle body. It’s easier than you think.

Installing a second battery for accessories and emergency purposes as well as our “Heavyweight Dual Battery Cable Kit” (Coming soon to the store)

Relocating the ICM, Coil, Relays, Ignition Relay and Engine Harness so I could mount the new overflow bottle in the 1991 and up, location.

Central Axle Disconnect Delete - Part 3: I make the 4x4 light in the instrument cluster work again after the CAD Delete.