Don’t have a tube bender? Don’t have a tube notcher? Don’t have a welder? Don’t have the slightest clue how to build a roll cage? Maybe you have all these things but just don’t have the time to design a …
An article on replacing my windows glassruns and inner and outer window wipe seals. It took longer to write the article.
Installation of a hand throttle from spare parts in the garage and yes, it’s on an automatic transmission.
Replacing my axle shaft bearings and seals on my Dana 44 rear axle.
Upgrading and relocating my vacuum reservoir under the hood after upgrading the front bumper.
An article by Ross Ramirez.
Installing a Slip Yoke Eliminator to avoid a transfer case drop and possibly dropping the driveshaft while off roading.
Tired of breaking mirrors on the Trail. I installed The Flop Shops - Trail Mirrors, the last set of mirrors you’ll ever need.
Relocating the ICM, Coil, Relays, Ignition Relay and Engine Harness so I could mount the new overflow bottle in the 1991 and up, location.
Central Axle Disconnect Delete - Part 3: I make the 4x4 light in the instrument cluster work again after the CAD Delete.