An article by Ross Ramirez.
Installing 6x9 speakers in the lift gate to get some more bump in the trunk.
LED Light bars are illegal to use on the highway and stock, sealed beam headlights suck. So let’s mix the two that are D.O.T. approved.
Tearing down the GM steering column to replace the Ignition Cylinder.
Rebuilding a Millermatic 175 welder to give it a second chance at life after severe water damage.
Replacing the HVAC Blower Motor and Motor Speed Resistor.
Relocating the ICM, Coil, Relays, Ignition Relay and Engine Harness so I could mount the new overflow bottle in the 1991 and up, location.
Central Axle Disconnect Delete - Part 3: I make the 4x4 light in the instrument cluster work again after the CAD Delete.
Deleting the infamous C101 Connector. This connector is on '87 and '88 Cherokees and Comanches; they are known to cause problems with sensor information to the ECM, due to high resistance.
Gauges cluster swap and LED lighting upgrades.